Port Forwarding/ PortTunneling via SSH/IMAP etc.

So you can’t access your WHM, or port 22 because your in a public area and it’s blocked. The solution is to use port forwarding/tunneling to route the traffic to another port so you can connect.

simple port forwarding (SSH tunneling)

This example creates a tunnel for HTTP. This will forward port 80 of your localhost to port 80 of www.example.com.
ssh -f -N -q -L 80:localhost:80 username@www.example.com
This example creates a tunnel for IMAP. Here we forward port 1143 on localhost to 143 (IMAP) on imap.example.com.
ssh -f -N -q -L 1143:localhost:143 username@imap.example.com
-f tells ssh to go into the background (daemonize).
-N tells ssh that you don’t want to run a remote command. That is, you only want to forward ports.
-q tells ssh to be quiet
-L specifies the port forwarding
port forwarding through an intermediary

You can have the remote machine forward ports to a third machine. This is useful where your have your local machine outside a firewall; a visible machine on the DMZ; and a third machine invisible to the outside.
This creates a tunnel from your localhost port 81 to port 80 through dmz.example.com. This lets you see the web server from outside a LAN.
ssh -f -N -q -L 81: username@dmz.example.com
This example creates a tunnel for SSH itself, over localhost port 2222.
ssh -f -N -q -L 2222:target-host.example.com:22 username@dmz.example.com
This example creates a tunnel for IMAP. Here we forward port 1143 on localhost to 143 (IMAP) on through dmz.example.com.
ssh -f -N -q -L 1143: username@dmz.example.com
VNC Viewer uses port 5900. This shows a double-hop.
# localhost –> wan-gateway –> dmz-gateway –> vnc-console
ssh -L 5900:localhost:5900 root@wan-gateway.example.com
ssh -L 5900:vnc-console.example.com:5900 root@dmz-gateway.example.com
reverse port forwarding

This is used in the following situation:
You have a server inside a private LAN that you want to connect to from the WAN outside.
You can’t create a NAT and port forwarding on your firewall to map the machine to the outside.
You have a server outside that you can connect to from the server inside the LAN.
What this does is creates a connection from the server in the LAN to the server outside. Once that connection is established the server outside starts listening on port 2222. All connections to port 2222 are sent back to port 22 of the server in the LAN. Now you can leave this connection running in your office; go home and ssh to your proxy server at port 2222 and you will be connecting to your server inside the LAN on port 22.
ssh -f -N -q -R 2222:localhost:22 my_name@remote.example.com
tricky reverse forwarding

This allows a server on an internal LAN expose a service to the outside WAN. For example, I have a database server that will only accept connections from a specific development box. That dev box is inside the firewall. I want to connect to the database from outside the firewall.
ssh -t -L 5432:localhost:1999 my_name@firewall.example.com ssh -t db_server ssh -t -R 1999: my_name@firewall
Using scp through a DMZ gateway to a machine behind a firewall using a tunnel

First you setup port forwarding through an intermediary. This forwards your localhost port 2222 to port 22 on Remember, that is not on your local network; is on the LAN network shared with
ssh -f -N -q -L 2222: user@
scp -P 2222 transformers.avi user@localhost:.
A diagram might help. Remember, port 22 is the SSH server port on the machine.
+—————+ +—————-+ +———————-+
| your | | remote DMZ | | server on remote LAN |
| local machine | | server | | |
| | | | | |
| 2222: >——-| |——-> :22 |
| | |______________/| | |
| | | | | |
+—————+ +—————-+ +———————-+
Other options

-o ExitOnForwardFailure=yes
-o GSSAPIAuthentication=no
-o GSSAPIAuthentication=no
-o HashKnownHosts=no
-o KbdInteractiveAuthentication=no
-o PermitLocalCommand=yes
-o LocalCommand=”logger connected to %h”
-o LocalForward=00:remote.example.com:000
-o ExitOnForwardFailure=yes
-o NoHostAuthenticationForLocalhost=yes
-o ProxyCommand=foo
-o RemoteForward=foo
-o RequestTTY=yes
-o SendEnv=LC_*
-o Tunnel=ethernet
-o TunnelDevice=any:any
-o VerifyHostKeyDNS=yes

Be the first to comment

Leave a Reply